Use and Care Instructions

After installation

• Garage door: Leave the garage door open until the morning after installation, unless our crew provides different instructions.
• Foot traffic: Wait at least 24 hours before walking on the floor. Depending on temperature, humidity, and site conditions, our crew may extend this to 36 hours or longer.
• Vehicle traffic: Wait at least 48 hours before parking or driving on the floor, unless our crew advises a longer wait.
• Water, cleaning, and coverings: Do not wash the floor, place mats or rugs, or return heavy furniture and equipment until the cure time provided by our crew has passed.
• Keep children, pets, moisture, and debris off the floor during the initial curing period.
• Always follow the specific return-to-use instructions provided by your installation crew.

Routine cleaning

• Sweep regularly with a soft-bristle broom or microfiber dust mop to remove sand, salt, and grit.
• Clean with water and, when needed, a pH-neutral cleaner suitable for coated floors. Follow the cleaner's dilution instructions.
• For stubborn dirt, allow the diluted cleaner to work for the time stated on its label without letting it dry. Gently scrub with a soft nylon brush.
• Rinse thoroughly and remove excess water with a rubber or foam squeegee, microfiber mop, or wet vacuum.
• Avoid leaving puddles on the floor. Standing hard water can leave mineral deposits and water spots.

Spills and cleaning products

• Clean up oil, fuel, automotive fluids, and other spills promptly. Chemical resistance does not mean every substance can remain on the floor indefinitely.
• Avoid bleach, vinegar, acidic cleaners, harsh solvents, aggressive degreasers, and floor-stripping products unless we approve them.
• Do not use wire brushes, steel wool, abrasive powders, or aggressive scrubbing pads.
• Contact us before using a pressure washer or an unfamiliar cleaning product.

Protecting your floor

• Lift furniture, tools, and equipment instead of dragging them.
• Use protective pads beneath furniture and suitable load-spreading pads beneath jack stands or other concentrated metal contact points.
• Keep mats and the floor beneath them clean and dry.
• Protect the coating from hot coals, welding sparks, and other sources of extreme heat.
• Use caution when wet. Water, snow, oil, and cleaner residue can make the surface slippery, even with added traction.

Winter care

• Remove tracked-in snow, slush, sand, and salt regularly.
• Use a plastic shovel without a metal wear strip, a snow broom, or equipment with a rubber edge that prevents metal contact with the coating.
• Do not allow snowplow blades, exposed metal edges, or ice chippers to scrape the coated surface.
• Ask us for an approved ice-melt recommendation. Follow the product's directions and remove residue when conditions allow.

Questions or repairs

If you notice peeling, chipping, unusual wear, or any other concerns, contact us promptly so we can help. Call or text (517) 332-1322. Please check with us before attempting repairs or applying another coating.

For warranty claims, complete the claim process on our website. Read the full limited lifetime residential warranty.